Language

86-15868381495

How to install wires in the room?

Update:Sep 29,2020
Summary: 1. Walk on the roof. The roof is not slotted in the roof, but along the wall along the inner corner. Then the ceiling hides the pipe. Jinhuanyu wire ...

1. Walk on the roof. The roof is not slotted in the roof, but along the wall along the inner corner. Then the ceiling hides the pipe. Jinhuanyu wire reminds you that if the water circuit fails, it is easy to find if the water circuit fails. The point of failure, maintenance is more timely and convenient. Of course, this method will waste water pipes and wires, and the budget will be higher.
2. Going on the ground: generally slotting on the floor or not, it takes less time to install on the ground, the construction is more convenient, the construction speed is also fast, the water pipes and wires can be greatly reduced, and the budget will be much less; Once a problem occurs, it is relatively complicated and time-consuming to pry the floor open. If the floor is covered with wooden floors, the loss may be more serious. If the floor is faulty, the water pipe will leak downstairs. If you consider taking the floor If so, the quality of the pipeline must be good!
3. Wall walking: the same is to slot, the circuit is not slotted, but the aesthetics is slightly worse, because there is no ceiling, and the material is relatively small compared with the walking ceiling, the budget can be much less, but the wall is slotted And the construction difficulty and time-consuming is relatively high and relatively long, the wall has certain damage!

Wholesale cable and wire